Table des calibres de fil AWG

Ce tableau donne les 44 calibres American Wire Gauge, de 0000 (4/0) à 40, avec le diamètre en mm et en pouces, la section en mm² et en kcmil, la résistance en ohms par km et par kft, et l'intensité admissible du cuivre pour le câblage en châssis et pour le transport de puissance.

44 lignes

Table des calibres de fil AWG

0000 (4/0)	11.684	0.46	107.22	211.6	0.1608	0.04901	380	302
000 (3/0)	10.405	0.4096	85.03	167.8	0.2028	0.0618	328	239
00 (2/0)	9.266	0.3648	67.43	133.1	0.2557	0.07793	283	190
0 (1/0)	8.251	0.3249	53.49	105.5	0.3224	0.09827	245	150
1	7.348	0.2893	42.41	83.69	0.4066	0.1239	211	119
2	6.544	0.2576	33.63	66.37	0.5127	0.1563	181	94
3	5.827	0.2294	26.67	52.63	0.6465	0.197	158	75
4	5.189	0.2043	21.15	41.74	0.8152	0.2485	135	60
5	4.621	0.1819	16.77	33.1	1.028	0.3133	118	47
6	4.115	0.162	13.3	26.25	1.296	0.3951	101	37
7	3.665	0.1443	10.55	20.82	1.634	0.4982	89	30
8	3.264	0.1285	8.366	16.51	2.061	0.6282	73	24
9	2.906	0.1144	6.634	13.09	2.599	0.7921	64	19
10	2.588	0.1019	5.261	10.38	3.277	0.9989	55	15
11	2.305	0.0907	4.172	8.234	4.132	1.26	47	12
12	2.053	0.0808	3.309	6.53	5.211	1.588	41	9.3
13	1.828	0.072	2.624	5.178	6.571	2.003	35	7.4
14	1.628	0.0641	2.081	4.107	8.286	2.525	32	5.9
15	1.45	0.0571	1.65	3.257	10.45	3.184	28	4.7
16	1.291	0.0508	1.309	2.583	13.17	4.016	22	3.7
17	1.15	0.0453	1.038	2.048	16.61	5.064	19	2.9
18	1.024	0.0403	0.823	1.624	20.95	6.385	16	2.3
19	0.912	0.0359	0.653	1.288	26.42	8.051	14	1.8
20	0.812	0.032	0.518	1.022	33.31	10.15	11	1.5
21	0.723	0.0285	0.411	0.81	42	12.8	9	1.2
22	0.644	0.0253	0.326	0.642	52.96	16.14	7	0.92
23	0.573	0.0226	0.258	0.509	66.79	20.36	4.7	0.73
24	0.511	0.0201	0.205	0.404	84.22	25.67	3.5	0.58
25	0.455	0.0179	0.162	0.32	106.2	32.37	2.7	0.46
26	0.405	0.0159	0.129	0.254	133.9	40.81	2.2	0.36
27	0.361	0.0142	0.102	0.202	168.9	51.47	1.7	0.29
28	0.321	0.0126	0.081	0.16	212.9	64.9	1.4	0.23
29	0.286	0.0113	0.064	0.127	268.5	81.84	1.2	0.18
30	0.255	0.01	0.051	0.101	338.6	103.2	0.86	0.14
31	0.227	0.0089	0.04	0.08	426.9	130.1	0.7	0.11
32	0.202	0.008	0.032	0.063	538.3	164.1	0.53	0.09
33	0.18	0.0071	0.025	0.05	678.8	206.9	0.43	0.07
34	0.16	0.0063	0.02	0.04	856	260.9	0.33	0.06
35	0.143	0.0056	0.016	0.032	1079	328.8	0.27	0.05
36	0.127	0.005	0.013	0.025	1361	414.8	0.21	0.04
37	0.113	0.0045	0.01	0.02	1716	523.1	0.17	0.03
38	0.101	0.004	0.008	0.016	2164	659.6	0.13	0.02
39	0.09	0.0035	0.006	0.012	2729	831.8	0.11	0.02
40	0.08	0.0031	0.005	0.01	3441	1049	0.09	0.01

Remarques

Ampacity values are for copper wire at 30C ambient, single conductor in free air. Actual ampacity depends on insulation type, ambient temperature, number of conductors, and installation method. Always consult NEC or local codes for specific applications.

Calculateurs Associés

Wire Gauge

Convert between AWG and mm², calculate wire current capacity, resistance, and voltage drop

Trace Width

Calculate minimum PCB trace width for current capacity per IPC-2221 and IPC-2152’s conservative Figure 5-1. Get resistance, voltage drop, and power dissipation at the width you draw. Free, instant results.

Voltage Drop

Calculate voltage drop across a cable run. Enter supply voltage, load current, wire gauge (AWG), and one-way distance to get voltage drop in volts and percent, power loss, and NEC 3%/5% compliance status. Supports copper and aluminum conductors.