5G NR Band Lookup — n78 Frequencies, NR-ARFCN & Resource Blocks
Look up any 5G NR operating band from 3GPP Release 18: uplink and downlink frequencies, duplex spacing, the band's NR-ARFCN range, NR-ARFCN to frequency and back, and the resource blocks for a channel bandwidth and subcarrier spacing.
3GPP Release 18: TS 38.101-1 V18.15.0 and TS 38.101-2 V18.14.0, Tables 5.2-1, 5.3.2-1 and 5.4.2.3-1; TS 38.104 V18.15.0, Table 5.4.2.1-1API slug 5g-nr-band-lookup
3 MHz or more
15 kHz or more
0 or more
0 MHz or more
NR operating bands
| Select band | Band | Duplex | Range | DL low | DL high | UL low | UL high |
|---|---|---|---|---|---|---|---|
| n1 | FDD | FR1 | 2.11GHz | 2.17GHz | 1.92GHz | 1.98GHz | |
| n2 | FDD | FR1 | 1.93GHz | 1.99GHz | 1.85GHz | 1.91GHz | |
| n3 | FDD | FR1 | 1.805GHz | 1.88GHz | 1.71GHz | 1.785GHz | |
| n5 | FDD | FR1 | 869MHz | 894MHz | 824MHz | 849MHz | |
| n7 | FDD | FR1 | 2.62GHz | 2.69GHz | 2.5GHz | 2.57GHz | |
| n8 | FDD | FR1 | 925MHz | 960MHz | 880MHz | 915MHz | |
| n20 | FDD | FR1 | 791MHz | 821MHz | 832MHz | 862MHz | |
| n25 | FDD | FR1 | 1.93GHz | 1.995GHz | 1.85GHz | 1.915GHz | |
| n28 | FDD | FR1 | 758MHz | 803MHz | 703MHz | 748MHz | |
| n38 | TDD | FR1 | 2.57GHz | 2.62GHz | 2.57GHz | 2.62GHz | |
| n40 | TDD | FR1 | 2.3GHz | 2.4GHz | 2.3GHz | 2.4GHz | |
| n41 | TDD | FR1 | 2.496GHz | 2.69GHz | 2.496GHz | 2.69GHz | |
| n48 | TDD | FR1 | 3.55GHz | 3.7GHz | 3.55GHz | 3.7GHz | |
| n66 | FDD | FR1 | 2.11GHz | 2.2GHz | 1.71GHz | 1.78GHz | |
| n71 | FDD | FR1 | 617MHz | 652MHz | 663MHz | 698MHz | |
| n77 | TDD | FR1 | 3.3GHz | 4.2GHz | 3.3GHz | 4.2GHz | |
| n78 | TDD | FR1 | 3.3GHz | 3.8GHz | 3.3GHz | 3.8GHz | |
| n79 | TDD | FR1 | 4.4GHz | 5GHz | 4.4GHz | 5GHz | |
| n257 | TDD | FR2 | 26.5GHz | 29.5GHz | 26.5GHz | 29.5GHz | |
| n258 | TDD | FR2 | 24.25GHz | 27.5GHz | 24.25GHz | 27.5GHz | |
| n259 | TDD | FR2 | 39.5GHz | 43.5GHz | 39.5GHz | 43.5GHz | |
| n260 | TDD | FR2 | 37GHz | 40GHz | 37GHz | 40GHz | |
| n261 | TDD | FR2 | 27.5GHz | 28.35GHz | 27.5GHz | 28.35GHz |
n78 · NR-ARFCN Frequency
- Frequency Range (1 = FR1, 2 = FR2)FR
- 1
- Downlink NR-ARFCN, FirstNDL,first
- 620 000
- Downlink NR-ARFCN, LastNDL,last
- 653 300
- Uplink NR-ARFCN, FirstNUL,first
- 620 000
- Uplink NR-ARFCN, LastNUL,last
- 653 300
- Finest Channel RasterΔFRaster
- 15kHz
- Transmission Bandwidth (N_RB × 12 × SCS)BWtx
- 98.28MHz
Formula
3GPP Release 18: TS 38.101-1 V18.15.0 and TS 38.101-2 V18.14.0, Tables 5.2-1, 5.3.2-1 and 5.4.2.3-1; TS 38.104 V18.15.0, Table 5.4.2.1-1
| Symbol | Quantity | Your value |
|---|---|---|
| NREF | NR-ARFCN, 0 to 3279165 | 636 700 |
| FREF | RF reference frequency (MHz) | 3.55 GHz |
| ΔFGlobal | Global raster step: 5 kHz below 3 GHz, 15 kHz to 24.25 GHz, 60 kHz above (kHz) | — |
| FREF-Offs, NREF-Offs | Raster offsets: 0 / 0, 3000 MHz / 600000, 24250.08 MHz / 2016667 | — |
| NRB | Maximum transmission bandwidth configuration in resource blocks | 273 |
| Δf | Subcarrier spacing (kHz) | — |
Assumptions
6 items
- 01Every band, NR-ARFCN range and N_RB is read from the 3GPP Release 18 tables (TS 38.101-1 V18.15.0, TS 38.101-2 V18.14.0, TS 38.104 V18.15.0), one table shared with the API; a band added in a later release is reported as unknown.
- 02An NR-ARFCN converts on the global raster, F_REF = F_REF-Offs + ΔF_Global·(N_REF − N_REF-Offs): 5 kHz steps from 0 MHz (channel 0), 15 kHz from 3000 MHz (channel 600000) and 60 kHz from 24250.08 MHz (channel 2016667); a frequency converts to the nearest channel, and beyond channel 3279165 or 100 GHz the last step is extended, with a warning.
- 03The duplex spacing is the downlink's low edge less the uplink's for a fixed-duplex FDD band, 0 for TDD, and absent for supplementary (SDL, SUL) and variable-duplex bands.
- 04N_RB is the general table's value for the frequency range, bandwidth and subcarrier spacing (Table 5.3.2-1), and the transmission bandwidth is N_RB × 12 × SCS; whether the band allows that bandwidth (Table 5.3.5-1) is not checked, and a combination the table lacks is absent, with a warning.
- 05The NR-ARFCN and the frequency are checked against the band's ranges and the global raster only: an out-of-band value is still converted, with a warning, and the band's channel raster is reported as its finest step, not enforced.
- 06The catalog's 23 bands (FR1 FDD and TDD, and FR2 n257 to n261) are each computed at the same bandwidth, spacing and channel, so the two conversions read the same on every row.
Worked example
A 2 140 MHz downlink: n1 or n66
A 20 MHz FDD carrier at 15 kHz subcarrier spacing has its downlink at NR-ARFCN 428 000. Bands n1 and n66 both contain that channel. What is its frequency and its resource-block count, and where does the handset transmit in each band?
| Step | Expression | Result |
|---|---|---|
| NR-ARFCN to frequency (5 kHz raster below 3 GHz) | 0 + 0.005 × (428 000 − 0) | 2.14 GHz |
| Band n1's duplex spacing (Table 5.2-1) | DL 2 110–2 170 MHz, UL 1 920–1 980 MHz: 2 110 − 1 920 | 190 MHz |
| Resource blocks (Table 5.3.2-1) | N_RB(FR1, 20 MHz, 15 kHz) | 106 |
| Transmission bandwidth | 106 × 12 × 15 kHz | 19.08 MHz |
| Paired uplink in n1 | 2 140 − 190 | 1 950 MHz |
| Band n66's duplex spacing (Table 5.2-1) | DL 2 110–2 200 MHz, UL 1 710–1 780 MHz: 2 110 − 1 710 | 400 MHz |
| Uplink in n66 instead | 2 140 − 400 | 1 740 MHz |
How it works
Every 5G NR carrier sits in an operating band defined by 3GPP, and every carrier frequency is named by a channel number, the NR-ARFCN. This calculator reads both from the Release 18 tables: TS 38.101-1 for frequency range 1 (FR1, 410 to 7125 MHz), TS 38.101-2 for frequency range 2 (FR2, 24.25 to 71 GHz) and the global raster of TS 38.104.
Operating bands and duplex
Each band row gives an uplink range, a downlink range and a duplex mode. In an FDD band the two ranges differ, and the duplex spacing is the distance between their lower edges: band n1 transmits from the handset at 1920 to 1980 MHz and receives at 2110 to 2170 MHz, 190 MHz apart. In a TDD band such as n78, 3300 to 3800 MHz, both directions share one range and the spacing is 0. Supplementary downlink (SDL) and supplementary uplink (SUL) bands carry only one direction, so the other is shown as absent rather than as zero. A few bands, n91 to n94 and n109, are variable-duplex: their uplink and downlink ranges are used independently, and they have no fixed spacing. The n78 reference page and the n257 reference page describe those two bands in more detail.
NR-ARFCN and the global raster
The NR-ARFCN runs from 0 to 3279165 and maps to the RF reference frequency through three raster ranges (TS 38.104, Table 5.4.2.1-1):
Below 3000 MHz the step is 5 kHz with no offset. From 3000 MHz to 24.25 GHz it is 15 kHz, counted from 3000 MHz at channel 600000. Above that it is 60 kHz, counted from 24250.08 MHz at channel 2016667. NR-ARFCN 636666 is therefore MHz. A band uses only part of the raster, its channel raster: every channel, or every second channel, within the band's NR-ARFCN range (Table 5.4.2.3-1). Band n78 runs from 620000 to 653333 on its 15 kHz raster, and on every second channel from 620000 on its 30 kHz raster.
Resource blocks
A resource block is 12 subcarriers. The largest number that fits a channel, , depends on the channel bandwidth and the subcarrier spacing (SCS) and is tabulated in Table 5.3.2-1 of each part. A 100 MHz channel at 30 kHz holds 273 resource blocks, which occupy kHz = 98.28 MHz; the rest is guard band. Some combinations do not exist, such as 100 MHz at 15 kHz in FR1, and are shown as absent.
Validity
The tables are those of 3GPP Release 18 (TS 38.101-1 V18.15.0, TS 38.101-2 V18.14.0 and TS 38.104 V18.15.0); a band added in a later release is reported as unknown. The resource-block count comes from the general table, and whether a particular band allows that bandwidth (Table 5.3.5-1 of each part) is not checked. NR-ARFCN values above 3279165 and frequencies above 100 GHz lie off the global raster: they are converted by extending its last step and shown with a warning.
Practical tips
- Start from a band preset: each one sets a bandwidth, a subcarrier spacing and an NR-ARFCN on that band's channel raster.
- Enter a frequency to find the nearest NR-ARFCN; a warning appears when the frequency is not on the global raster.
- Before planning a bandwidth, confirm in Table 5.3.5-1 of TS 38.101-1 or TS 38.101-2 that the band allows it, because this page uses the general resource-block table.
- Carry the resource-block count into the 5G NR link budget calculator to get the noise floor of the carrier.
Common mistakes
- Converting an NR-ARFCN with one formula for every band. The raster step changes at 3 GHz and at 24.25 GHz, so the same arithmetic gives the wrong frequency outside its own range.
- Calling the duplex spacing of a TDD band undefined, or that of a supplementary band zero. A TDD band shares one range, so its spacing is 0; an SDL or SUL band has no second direction at all.
- Assuming every NR-ARFCN inside the band is a usable channel. With 30 kHz subcarrier spacing in n78 only every second channel is on the channel raster, and channels near the edge would spill outside the band.
- Reading a resource-block count for a bandwidth and spacing the standard does not define, such as 100 MHz at 15 kHz, or taking the FR1 count for an FR2 carrier: 50 MHz at 60 kHz is 65 resource blocks in FR1 and 66 in FR2.
Frequently asked questions
5 questions
What frequency range is band n78?
Band n78 covers 3300 to 3800 MHz in time-division duplex, so uplink and downlink share the same range. Its NR-ARFCN range is 620000 to 653333 in 3GPP Release 18.
How do I convert an NR-ARFCN to a frequency?
Find the raster range the channel number falls in. Below 600000 the frequency in MHz is 0.005 times the number. From 600000 to 2016666 it is 3000 plus 0.015 times the amount above 600000. From 2016667 it is 24250.08 plus 0.06 times the amount above 2016667.
How many resource blocks does a 100 MHz NR carrier have?
In FR1 a 100 MHz channel holds 273 resource blocks at 30 kHz subcarrier spacing and 135 at 60 kHz. At 15 kHz the standard defines no 100 MHz channel. In FR2 a 100 MHz channel holds 132 at 60 kHz and 66 at 120 kHz.
What is the difference between FR1 and FR2?
FR1 runs from 410 to 7125 MHz and holds bands such as n1, n41 and n78. FR2 holds the millimetre-wave bands from 24.25 GHz, such as n257 and n258, with wider channels and larger subcarrier spacings.
Why is the uplink of some bands shown as absent?
Supplementary downlink bands, such as n29 and n75, carry only downlink and are paired with an uplink in another band. Supplementary uplink bands, such as n80 and n84, carry only uplink, so their downlink is absent instead.
References
3GPP TS 38.101-1, NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone, V18.15.0 (Release 18) · 3GPP TS 38.101-2, NR; User Equipment (UE) radio transmission and reception; Part 2: Range 2 Standalone, V18.14.0 (Release 18) · 3GPP TS 38.104, NR; Base Station (BS) radio transmission and reception, V18.15.0 (Release 18)
- 3GPP TS 38.101-1, NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone, V18.15.0 (Release 18) — 3GPP, 2026-09 — Table 5.2-1 (FR1 operating bands), Table 5.3.2-1 (N_RB), Table 5.4.2.3-1 (NR-ARFCN per band)
- 3GPP TS 38.101-2, NR; User Equipment (UE) radio transmission and reception; Part 2: Range 2 Standalone, V18.14.0 (Release 18) — 3GPP, 2026-09 — Table 5.2-1 (FR2 operating bands), Table 5.3.2-1, Tables 5.4.2.3-1 and 5.4.2.3-2
- 3GPP TS 38.104, NR; Base Station (BS) radio transmission and reception, V18.15.0 (Release 18) — 3GPP, 2026-09 — §5.4.2.1 and Table 5.4.2.1-1, the global frequency raster and NR-ARFCN
Reproduces the Release 18 tables for n78 (3300–3800 MHz TDD, NR-ARFCN 620000–653333, 273 RB at 100 MHz and 30 kHz), n1 (190 MHz duplex spacing, 428000 → 2140 MHz) and n257 (2054166 → 26500.02 MHz); a supplementary band reports its missing direction as absent.
Shop Components
As an Amazon Associate we earn from qualifying purchases.