5G NR Link Budget Calculator — 3GPP TR 38.901 Path Loss, SINR & Range
A 5G NR link budget on the 3GPP channel models: TR 38.901 path loss for rural macro, urban macro, urban micro and indoor office, LOS or NLOS, the noise floor from the resource blocks, SINR, link margin, the maximum range inside the model's validity and the TS 38.306 peak data rate.
3GPP TR 38.901 V17.0.0, Table 7.4.1-1; TS 38.101-1 V18.15.0 Table 5.3.2-1; TS 38.306 V18.11.0, §4.1.2API slug 5g-nr-link-budget
Link budget
Transmitter to receiver · level at each term’s output| Move up | Term | ValuedB | Distancem | Σ LeveldBm | MargindB | Loss share | Term actions | |
|---|---|---|---|---|---|---|---|---|
| Transmitter | — | 46.0 | 122.1 | 0.0 % | ||||
| Cable & body limits Margin | — | 43.0 | 119.1 | 2.3 % | ||||
| Tx antenna | — | 60.0 | 136.1 | 0.0 % | ||||
| Path | — | −69.9 | 6.1 | 97.7 % | ||||
| Rx antenna | — | −69.9 | 6.1 | 0.0 % | ||||
Σ columns give each value at the row’s output: the chain cut after that row.
0 to 3
0 to 1
100 MHz or more
3 MHz or more
15 kHz or more
1 m or more
500 mm or more
0 dB or more
0 dB or more
0 dB or more
1 to 8
1 to 10
0.1 to 1
0 to 1
Term 2 · Cable & body limits Link Margin. Setting its Value to 1.5 dB takes Link Margin from 6.1 dB to 7.6 dB.
- Maximum Allowable Path LossMAPL
- 136.1dB
- Resource Blocks (N_RB)NRB
- 273
- Occupied Bandwidth (N_RB × 12 × SCS)BWocc
- 98.28MHz
- Thermal Noise (kTB)N0 B
- −94.1dBm
- Receiver Noise Floor (kTB + NF)N
- −87.1dBm
- Breakpoint Distanced'BP
- 560.4m
- Shadow-Fading Std (σ_SF)σSF
- 6.0dB
- Peak Data Rate (TS 38.306)Rpeak
- 2.337Gbps
Formula
3GPP TR 38.901 V17.0.0, Table 7.4.1-1; TS 38.101-1 V18.15.0 Table 5.3.2-1; TS 38.306 V18.11.0, §4.1.2
| Symbol | Quantity | Your value |
|---|---|---|
| PL | TR 38.901 Table 7.4.1-1 path loss for the scenario and LOS state (dB) | 129.9 dB |
| NRB | Resource blocks for the bandwidth and SCS (TS 38.101 Table 5.3.2-1) | 273 |
| kT0 | Thermal noise density at 290 K, −173.975 dBm/Hz (dBm/Hz) | — |
| NF | Receiver noise figure (dB) | 7.0 dB |
| MSF, M_I | Shadow-fading and interference margins (dB) | — |
| SINRreq | SINR required by the modulation and coding (dB) | 0.0 dB |
Assumptions
6 items
- 01Path loss is the median of 3GPP TR 38.901 V17.0.0 Table 7.4.1-1 for the scenario (RMa, UMa, UMi street canyon or InH office) and the line-of-sight state, the NLOS loss being the larger of the LOS and NLOS formulas; shadowing enters only as the margin entered, and the probability of line of sight is not applied.
- 02The breakpoint distances use c = 299,792,458 m/s where TR 38.901 writes 3.0 × 10⁸ m/s; UMa and UMi take an effective environment height of 1 m, kept even for a UT at 13 m or higher, where the standard draws it at random, and RMa a building height of 5 m and a street width of 20 m.
- 03The noise is kT₀ = −173.975 dBm/Hz at 290 K over the occupied bandwidth N_RB × 12 × SCS, with N_RB from TS 38.101-1 or 38.101-2 Table 5.3.2-1, plus the noise figure, and the interference margin raises that floor; between FR1 (to 7.125 GHz) and FR2 (from 24.25 GHz) no noise, margin or rate is given.
- 04The received power is the transmit power plus both antenna gains less the lumped losses, the path loss and up to six extra losses (building entry, car, body, foliage), all in dB; the maximum allowable path loss also holds back the shadow-fading margin and the required SINR, and the link margin is that allowance less the path loss.
- 05A distance of 0 is taken as no path at all, 0 dB of path loss, so the chain can be cut before the path; the maximum range solves PL(d) = MAPL only inside the scenario’s distance range, and is given at its far limit, with a warning, when the link still closes there.
- 06The peak data rate is TS 38.306 section 4.1.2’s approximation for one carrier, with R_max = 948/1024 and the overhead of the frequency range and direction: a capability figure, not a throughput.
Worked example
n78 macro cell to a user indoors
A 3.5 GHz n78 macro cell transmits 46 dBm into a 17 dBi panel 25 m up, on a 100 MHz carrier at 30 kHz subcarrier spacing. A handset 1.5 m up and 300 m away, out of sight of the mast and indoors behind a façade that costs 13 dB, has a 0 dBi antenna and a 7 dB noise figure. With 3 dB of other losses, an 8 dB shadow-fading margin, a 3 dB interference margin and a required SINR of 0 dB, does the link close, and how far could the user be?
| Step | Expression | Result |
|---|---|---|
| Slant distance d₃D | √(300² + (25 − 1.5)²) | 300.92 m |
| UMa LOS path loss below the breakpoint, PL₁ | 28 + 22·log10(300.92) + 20·log10(3.5) | 93.41 dB |
| UMa NLOS model, PL′ | 13.54 + 39.08·log10(300.92) + 20·log10(3.5) − 0.6 × (1.5 − 1.5) | 121.28 dB |
| Path loss, UMa NLOS (the larger of the two) | max(93.41, 121.28) | 121.3 dB |
| Noise floor, 273 resource blocks | −173.975 + 10·log10(273 × 12 × 30 000) + 7 | −87.1 dBm |
| Received power | 46 + 17 + 0 − 3 − 121.28 − 13 | −74.3 dBm |
| Maximum allowable path loss | 46 + 17 + 0 − 3 − 13 − 8 − (−87.05 + 3 + 0) | 123.1 dB |
| Link margin | 123.05 − 121.28 | 1.8 dB |
| Slant distance at which PL′ reaches 123.05 dB | 10^((123.05 − 13.54 − 20·log10(3.5) + 0.6 × (1.5 − 1.5)) / 39.08) | 334.0 m |
| Maximum range | √(334.0² − (25 − 1.5)²) | 333.2 m |
How it works
A link budget adds up everything between a transmitter and a receiver and asks whether the signal arrives with enough margin. Two parts of a 5G NR budget come from the standard itself: the path-loss model, taken here from the 3GPP channel model TR 38.901, and the noise bandwidth, set by the number of resource blocks in the carrier.
Path loss from TR 38.901
TR 38.901 Table 7.4.1-1 gives the median path loss for four deployments: rural macro (RMa), urban macro (UMa), urban micro street canyon (UMi) and indoor office (InH). Each has a line-of-sight (LOS) formula and a non-line-of-sight (NLOS) one. Outdoors the LOS loss steepens beyond a breakpoint distance, where the ground reflection starts to cancel the direct ray. For UMa
with both antenna heights reduced by an effective environment height of 1 m. Below the breakpoint , with in GHz and the direct distance in metres. The NLOS loss is the larger of the LOS loss and the NLOS formula, which for UMa is . At 3.5 GHz and 500 m from a 25 m mast the two give 98.27 dB and 129.92 dB: the line-of-sight state decides most of the budget.
Noise and SINR
The receiver noise is the thermal noise in the occupied bandwidth plus the noise figure:
where is −173.975 dBm/Hz at 290 K. A 100 MHz carrier at 30 kHz subcarrier spacing has 273 resource blocks occupying 98.28 MHz, so its thermal noise is −94.05 dBm before the noise figure. The interference margin raises that floor to allow for other cells, and the SINR is the received power over the raised floor.
Margin and range
The maximum allowable path loss is what the transmit power and antenna gains can lose before the SINR falls to the required value, after the shadow-fading margin has been set aside. The link margin is that limit less the path loss, and the maximum range is the distance at which the path loss reaches it. The shadow-fading standard deviation of the scenario is shown to help choose the margin: about 1.28 standard deviations covers 90% of locations at a given distance.
Peak data rate
The peak rate is the approximation of TS 38.306, section 4.1.2:
with MIMO layers, bits per modulation symbol, a scaling factor , and an overhead of 0.14 for FR1 downlink, 0.08 for FR1 uplink, 0.18 and 0.10 in FR2. Four layers of 256-QAM on 273 resource blocks at 30 kHz give about 2337 Mbps.
Validity
Each scenario holds over the ranges of Table 7.4.1-1: 0.5 to 100 GHz (30 GHz for RMa); 10 m to 5 km of ground distance (10 km for RMa in line of sight); user heights of 1.5 to 22.5 m in UMa and UMi and 1 to 10 m in RMa; base-station heights of 10 to 150 m in RMa, and exactly 25 m in UMa and 10 m in UMi; and 1 to 150 m of direct distance indoors. Outside them the path loss is still shown, with a warning naming the bound. The maximum range is searched only inside the scenario's distance range: when the link would still close at the far limit, the range is given at that limit with a warning. The breakpoint uses the exact speed of light, where TR 38.901 writes 3.0×10⁸ m/s. Resource blocks are defined only in FR1, up to 7.125 GHz, and in FR2, from 24.25 GHz; between them no noise, margin or rate is given. The probability of line of sight is not applied, and UMa keeps an effective environment height of 1 m even above 13 m, where TR 38.901 draws it at random.
Practical tips
- Use the scenario presets: each sets the mast height TR 38.901 assumes for it, 25 m for UMa and 10 m for UMi, and a typical distance.
- Set the shadow-fading margin from the shadow-fading output: about 1.28 times it covers 90% of locations at the cell edge.
- Look up the resource blocks and the band edges in the 5G NR band lookup calculator first, then enter the carrier frequency here.
- Run the budget for both link directions: switch the direction to uplink and enter the handset's power and the base station's noise figure.
Common mistakes
- Using the line-of-sight formula for a street-level user in a city. Beyond a few hundred metres most urban users are out of sight of the mast, and the NLOS loss is 30 dB or more higher.
- Computing the noise over the channel bandwidth instead of the occupied bandwidth. A 100 MHz carrier at 30 kHz occupies 98.28 MHz, and the noise is set by the resource blocks, not the nominal bandwidth.
- Extending a range past the distances the model was fitted over. TR 38.901 outdoor formulas stop at 5 km (10 km for rural line of sight); beyond them the result is an extrapolation.
- Treating the peak data rate as what a user will see. It assumes every resource block, the highest modulation and the best channel, and is a capability figure, not a throughput forecast.
Frequently asked questions
5 questions
Which path-loss model does this 5G link budget use?
It uses the 3GPP channel model TR 38.901, Table 7.4.1-1, for rural macro, urban macro, urban micro street canyon and indoor office, each in line of sight or not. These are the models 3GPP uses to evaluate 5G systems from 0.5 to 100 GHz.
What is the noise floor of a 100 MHz 5G NR carrier?
At 30 kHz subcarrier spacing the carrier has 273 resource blocks occupying 98.28 MHz, so the thermal noise is about −94.05 dBm. Add the receiver noise figure to get the noise floor, for example −87.05 dBm with a 7 dB noise figure.
How is the 5G peak data rate calculated?
TS 38.306 approximates it as the layers times the modulation bits times the scaling factor times 948/1024 times the resource blocks times 12 subcarriers per OFDM symbol, less an overhead. Four layers of 256-QAM on 273 resource blocks at 30 kHz give about 2337 Mbps.
Why does the maximum range stop at 5 km?
The outdoor formulas of TR 38.901 are defined only up to 5 km of ground distance, or 10 km for rural macro in line of sight. When the link would still close at that limit, the calculator reports the limit with a warning instead of extrapolating.
What shadow-fading margin should I use?
Each scenario lists a shadow-fading standard deviation, from 3 dB indoors in line of sight to 8 dB in rural macro and 8.03 dB indoors out of sight. A margin of about 1.28 standard deviations covers 90% of locations at a given distance, and about 1.64 covers 95%.
References
3GPP TR 38.901, Study on channel model for frequencies from 0.5 to 100 GHz, V17.0.0 (Release 17) · 3GPP TS 38.306, NR; User Equipment (UE) radio access capabilities, V18.11.0 (Release 18) · 3GPP TS 38.101-1, NR; UE radio transmission and reception; Part 1: Range 1 Standalone, V18.15.0 (Release 18)
- 3GPP TR 38.901, Study on channel model for frequencies from 0.5 to 100 GHz, V17.0.0 (Release 17) — 3GPP / ETSI TR 138 901 V17.0.0 (2022-04), §7.4.1, Table 7.4.1-1 — path loss, shadow fading and applicability ranges
- 3GPP TS 38.306, NR; User Equipment (UE) radio access capabilities, V18.11.0 (Release 18) — 3GPP, 2026-09 — §4.1.2, supported maximum data rate for DL/UL
- 3GPP TS 38.101-1, NR; UE radio transmission and reception; Part 1: Range 1 Standalone, V18.15.0 (Release 18) — 3GPP, 2026-09 — Table 5.3.2-1, maximum transmission bandwidth configuration N_RB
Reproduces TR 38.901 UMa at 3.5 GHz and 500 m (98.27 dB LOS, 129.92 dB NLOS), the −94.05 dBm thermal noise of 273 resource blocks at 30 kHz, and the TS 38.306 peak rate of about 2337 Mbps for 4 layers of 256-QAM; the two LOS branches meet at the breakpoint within 0.1 dB.
Shop Components
As an Amazon Associate we earn from qualifying purchases.