915 MHz ISM Band
- ITU designation
- 902–928MHz
- Radio Regulations No. 5.150
- Frequency Range
- 902–928MHz
- ISM Band (Americas/Region 2)
- Centre
- 915MHz
- Midpoint of the band edges
- Wavelength
- 327.6mm
- 323.1 mm–332.4 mm across the band
- λ/4 in free space
- 81.91mm
- At the centre frequency
- Path loss at 100 m
- 71.7dB
- Free space, at 915 MHz
Who uses the band
CEPT RFID channels, 915-919.4 MHzCEPT · All 3 channels · recommendation
400 kHz channels: 4 W e.r.p. RFID interrogators, 100 mW e.r.p. other SRD.5
| Channel | Centre (MHz) | Edges (MHz) |
|---|---|---|
| RFID 1 | 916.3 | — |
| RFID 2 | 917.5 | — |
| RFID 3 | 918.7 | — |
Regulatory limits
Licence-exemptIn the US, licence-exempt under Part 15 (§15.247 spread-spectrum and digital modulation, §15.249 low power); it is also the US 33 cm amateur band. CEPT opens 915-919.4 MHz to SRDs and RFID; Japan opens 920.5-928.1 MHz to specified low-power stations.2,3,5,6
| Region | Rule | Range (MHz) | Limit | Notes |
|---|---|---|---|---|
| United States | 47 CFR §15.247(b)(2), (a)(1)(i) | 902–928 | 1 W conducted, peak | Frequency hopping with at least 50 channels (20 dB bandwidth < 250 kHz, ≤ 0.4 s per 20 s on any frequency).2 |
| 47 CFR §15.247(b)(2), (a)(1)(i) | 902–928 | 0.25 W conducted, peak | Frequency hopping with 25-49 channels (20 dB bandwidth 250-500 kHz).2 | |
| 47 CFR §15.247(b)(3), (a)(2) | 902–928 | 1 W conducted | Digital modulation (6 dB bandwidth ≥ 500 kHz); peak or maximum conducted output power.2 | |
| 47 CFR §15.247(e) | 902–928 | 8 dBm/3 kHz conducted density | Digital modulation: power spectral density into the antenna.2 | |
| 47 CFR §15.247(b)(4) | 902–928 | 6 dBi antenna gain | The conducted limits assume ≤ 6 dBi; above it, reduce conducted power by the dB the gain exceeds 6 dBi (1 W + 6 dBi = 4 W e.i.r.p.). No fixed point-to-point exception in this band.2 | |
| 47 CFR §15.249(a), (c) | 902–928 | 50 mV/m field strength, at 3 m | Any modulation, low power; harmonics 500 µV/m at 3 m.3 | |
| 47 CFR §15.245(b) | 902–928 | 500 mV/m field strength, at 3 m | Field disturbance sensors (motion sensors) only, excluding perimeter protection.4 | |
| 47 CFR §97.313(b) | 902–928 | 1.5 kW PEP | Amateur 33 cm band (secondary, §97.303(b)); §97.313(g) limits stations within 241 km of White Sands Missile Range to 50 W PEP.7,8 | |
| CEPT | ERC/REC 70-03 Annex 1 h3 (recommendation) | 915–919.4 | 25 mW ERP1 % duty cycle | ≤ 600 kHz; 100 mW e.r.p. (≤ 400 kHz) in the RFID channels 916.3, 917.5 and 918.7 MHz. May be limited or unavailable where the band is used for defence or extended GSM-R; check national implementation.5 |
| ERC/REC 70-03 Annex 11 b (recommendation) | 915–919.4 | 4 W ERP | RFID interrogators only, in three 400 kHz channels centred on 916.3, 917.5 and 918.7 MHz.5 | |
| Japan | Radio Equipment Regulations Art. 49-14(7) | 920.5–928.1 | 16 dBm EIRP3 dBi antenna gain | Specified low-power stations on 200 kHz unit channels from 920.6 MHz; carrier sense and transmit-time limits apply. Antenna gain ≤ 3 dBi, and gain must be reduced by any excess of e.i.r.p. over 16 dBm. Japan's band runs to 928.1 MHz, 0.1 MHz above this page's 928 MHz edge.6 |
A summary, not legal advice. Check the current rule text for your region. A region missing here was not sourced; it does not mean the band has no rule there.
ITU allocation
In Region 2, 902-928 MHz is allocated to the fixed service (primary) with amateur, mobile and radiolocation secondary, and No. 5.150 designates it for ISM. Regions 1 and 3 have no ISM designation here (890-942 MHz is fixed, mobile and broadcasting).
| Range (MHz) | ITU Region | Services | Footnotes |
|---|---|---|---|
| 902–928 | Region 2 | Fixed, Amateur, Mobile except aeronautical mobile, Radiolocation | 5.150, 5.312B, 5.325, 5.325A, 5.3261 |
Primary services in capitals, secondary in normal type, as the Radio Regulations print them.
Sources
- 1Radio Regulations, Edition of 2024, Volume 1: ArticlesITU · Edition of 2024 (incorporates WRC-23; in force 1 January 2025) · Article 5, 890-942 MHz; No. 5.150Accessed 2026-10-21
- 247 CFR §15.247 Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHzUS Federal Communications Commission (eCFR) · eCFR Title 47, up to date as of 19 October 2026 · §15.247(a)(1)(i), (a)(2), (b)(2)-(4), (e)Accessed 2026-10-21
- 347 CFR §15.249 Operation within the bands 902-928 MHz, 2400-2483.5 MHz, 5725-5875 MHz, and 24.0-24.25 GHzUS Federal Communications Commission (eCFR) · eCFR Title 47, up to date as of 19 October 2026 · §15.249(a), (c)Accessed 2026-10-21
- 447 CFR §15.245 Operation within the bands 902-928 MHz, 2435-2465 MHz, 5785-5815 MHz, 10500-10550 MHz, and 24075-24175 MHzUS Federal Communications Commission (eCFR) · eCFR Title 47, up to date as of 19 October 2026 · §15.245(a)-(b)Accessed 2026-10-21
- 5ERC Recommendation 70-03: Relating to the use of Short Range Devices (SRD)CEPT ECC (ECO Documentation Database) · Edition of June 2026 (latest amended 5 June 2026, WG FM#113) · Annex 1 h3 and note 5; Annex 11 b and note 2Accessed 2026-10-21
- 6Radio Equipment Regulations (無線設備規則, Radio Regulatory Commission Rule No. 18 of 1950)Japan, Ministry of Internal Affairs and Communications (e-Gov law database) · As in force 1 October 2026 (revision 325M50080000018_20261001_508M60000008115) · Article 49-14, item 7 (920.5-928.1 MHz)Accessed 2026-10-21
- 747 CFR §97.313 Transmitter power standards (Amateur Radio Service)US Federal Communications Commission (eCFR) · eCFR Title 47, up to date as of 19 October 2026 · §97.313(b), (g)Accessed 2026-10-21
- 847 CFR §97.303 Frequency sharing requirements (Amateur Radio Service)US Federal Communications Commission (eCFR) · eCFR Title 47, up to date as of 19 October 2026 · §97.303(b)Accessed 2026-10-21
Propagation Characteristics
Better range than 2.4 GHz for the same power level. Good building penetration. Typical outdoor range: 500 m–5 km depending on antennas and environment.
Applications
- LoRaWAN US915
- Zigbee (channel 0)
- Wi-SUN smart grid
- RFID UHF (860–960 MHz)
- Baby monitors
- Cordless phones (older)