Skip to content

Radar Range Equation Calculator

Calculate maximum radar detection range from peak power, antenna gain, RCS, noise figure, and bandwidth using the radar equation. Free, instant results.

Monostatic radar range equation · kT₀BF noise floor · Albersheim SNR_req for P_d, P_fa and NAPI slug radar-range-equation

Sign in to saveSave

Inputs

Example
Peak transmitter output power in kilowatts

1 W or more

Transmit/receive antenna gain (same antenna assumed)
dBi

0 dBi or more

100 MHz or more

Target radar cross section in square meters

0.001 m² or more

Receiver noise figure in dB
dB

0 dB or more

Receiver noise bandwidth in MHz

1 kHz or more

Required probability of detecting the target; Albersheim's equation holds for 0.1 to 0.9

0.01 to 0.999

Allowed probability that noise alone crosses the threshold, e.g. 1e-6; Albersheim's equation holds for 1e-7 to 1e-3

1×10⁻¹² to 0.1

Pulses integrated noncoherently before detection; 1 is a single pulse

1 to 8 096

Results

Live

Maximum Detection Range 35.23 km

Maximum Detection RangeRmax
35.23km
SNR at Max RangeSNR
13.1dB
Received Power at 1 kmPr
−33.0dBm

Maximum Detection Range against Radar Cross Section (RCS)

0204060801001200.01 m²0.1 m²1 m²10 m²100 m²km

Drag the operating point or type a value.

Formula

Albersheim, A closed-form approximation to Robertson's detection characteristics, Proc. IEEE 69(7), 1981, p. 839; Skolnik, Introduction to Radar Systems, 3rd ed. (2001), Fig. 2.7
Rmax=(Pt⋅G2⋅λ2⋅σ/((4π)3⋅k⋅T0⋅B⋅F⋅SNRreq))1/4,SNRreq=−5⋅log⁡10N+(6.2+4.54/√(N+0.44))⋅log⁡10(A+0.12AB+1.7B)R_{max} = (Pt·G²·λ²·σ / ((4π)³·k·T₀·B·F·\mathrm{SNR}_{req}))^{1/4},\quad \mathrm{SNR}_{req} = −5·\operatorname{log}₁₀N + (6.2 + 4.54/√(N + 0.44))·\operatorname{log}₁₀(A + 0.12AB + 1.7B)
SymbolQuantityYour value
RmaxMaximum detection range (m)35.23 km
PtPeak transmit power (W)100 kW
GAntenna gain (linear)30.0 dBi
λWavelength (m)—
σRadar cross section (m²)1 m²
PminMinimum detectable signal (kTBF) (W)—
SNRreqSingle-pulse SNR the detection requirement needs (dB)—
Aln(0.62/P_fa)—
Bln(P_d/(1 − P_d))1 MHz
NPulses integrated noncoherently1
With your inputs
SNR_req = Albersheim at P_d = 0.9, P_fa = 1×10⁻⁶, N = 113.11 dB
R_max = (100 kW × G² × λ² × 1 m² / ((4π)³ × k × 290 K × 1 MHz × F))^¼ × 10^(−SNR_req/40), G = 30.0 dBi, F = 6.0 dB, λ = c / 3 GHz35.23 km
P_r = 10·log₁₀(100 kW × G² × λ² × 1 m² / ((4π)³ × (1 km)⁴))−32.98 dBm

Assumptions

6 items
  1. 01Monostatic radar: one antenna transmits and receives, so its gain enters squared (G²).
  2. 02Maximum range is where the echo reaches the noise floor kTBF times the required SNR, which Albersheim's equation gives for the entered P_d, P_fa and pulse count: 13.11 dB at 0.9, 10⁻⁶ and one pulse.
  3. 03Thermal noise at T = 290 K with k = 1.380649×10⁻²³ J/K; the noise figure is the only receiver degradation, and no system, atmospheric or processing losses are included.
  4. 04Peak power on a nonfluctuating target of constant σ, with N pulses integrated noncoherently as Albersheim assumes; a fluctuating (Swerling) target needs a higher SNR. λ = c/f with c = 299 792 458 m/s.
  5. 05Free-space propagation both ways, with no multipath, ground reflection or clutter.
  6. 06The received-power output is evaluated at a fixed 1 km reference range, not at the maximum range.

Worked example

S-band airport radar, Boeing 737 target

An S-band airport surveillance radar transmits 25 kW peak at 2.8 GHz through a 34 dBi antenna. The target is a Boeing 737 nose-on (σ = 30 m²), and the receiver has a 3 dB noise figure in a 1 MHz bandwidth.

StepExpressionResult
Wavelength299 792 458 m/s / 2.8 GHz0.1071 m
Noise floor1.380649×10⁻²³ J/K × 290 K × 1 MHz × 10^(3/10)−110.98 dBm
Albersheim's A termln(0.62 / 1×10⁻⁶)13.3375
Albersheim's B termln(0.9 / (1 − 0.9))2.1972
Required SNR, P_d 0.9 and P_fa 1×10⁻⁶ on one pulse−5·log10(1) + (6.2 + 4.54/√(1 + 0.44)) × log10(13.3375 + 0.12 × 13.3375 × 2.1972 + 1.7 × 2.1972)13.1 dB
Minimum detectable signal−110.98 dBm + 13.11 dB−97.86 dBm
Maximum range(25 000 × (10^(34/10))² × 0.1071² × 30 / ((4π)³ × 10^((−97.86 − 30)/10)))^¼ / 1000113.7 km
Echo at 1 km10·log10(25 000 × (10^(34/10))² × 0.1071² × 30 / ((4π)³ × 1 000⁴) × 1000)−15.6 dBm
Required SNR with 10 pulses integrated−5·log10(10) + (6.2 + 4.54/√(10 + 0.44)) × log10(13.3375 + 0.12 × 13.3375 × 2.1972 + 1.7 × 2.1972)4.99 dB
Range with 10 pulses integrated113.7 × 10^((13.11 − 4.99)/40)181.5 km

How it works

The Radar Range Equation calculates maximum detection distance for a given target — the foundation of every radar system design from airport surveillance to automotive collision avoidance. Defense contractors, aviation authorities, and automotive engineers use this to specify transmitter power, antenna size, and receiver sensitivity.

The standard form from Skolnik's Radar Handbook (IEEE Press): R_max = [(P_t·G²·λ²·σ) / ((4π)³·S_min)]^(1/4), where P_t is peak power, G is antenna gain, λ is wavelength, σ is radar cross-section (RCS), and S_min is minimum detectable signal. The fourth-root relationship means doubling range requires 16× the power — a critical constraint in radar design.

Typical RCS values (Skolnik, IEEE): commercial aircraft 10–100 m², fighter jet 1–10 m², cruise missile 0.1–1 m², stealth aircraft 0.001–0.01 m², bird 0.001–0.01 m². Weather radar detects precipitation with RCS of 10⁻¹⁴ m² per cubic meter of rain. For automotive radar (77 GHz), pedestrian RCS is 0.5–2 m², bicycle 1–3 m², car 10–100 m². Detection probability of 90% (P_d = 0.9) with a false alarm probability of 10⁻⁶ requires an SNR of 13.2 dB for a nonfluctuating target (Skolnik, Fig. 2.7); a fluctuating Swerling I target needs about 21 dB. The calculator evaluates the maximum range at that requirement, from Albersheim's equation (13.1 dB).

Practical tips

  • Apply 4th-root rule: 16× power for 2× range, 256× power for 4× range — explains why long-range radar uses megawatt transmitters
  • Add 6–10 dB atmospheric loss for X-band (10 GHz) beyond 100 km; use ITU-R P.676 for precise attenuation vs. frequency
  • Account for pulse integration: N coherent pulses improve SNR by 10·log₁₀(N) dB. 100 pulses = 20 dB improvement
  • Clutter-limited radars: noise floor replaced by clutter return, typically −40 to −60 dBsm/m² for land, −50 to −70 dBsm/m² for sea (Skolnik)

Common mistakes

  • Using peak power instead of average power for duty-cycle-limited systems — a 1% duty cycle reduces effective power by 20 dB
  • Ignoring antenna pattern losses: typical −3 dB beamwidth captures only 50% of target time, adding 3 dB effective loss
  • Assuming constant RCS: real targets fluctuate ±10 dB (Swerling models). Use statistical P_d curves, not deterministic SNR
  • Forgetting two-way propagation: radar suffers R⁴ loss (not R²) because signal travels to target AND back

Frequently asked questions

4 questions
What factors most significantly impact radar range?

Transmitted power and antenna gain dominate (both to 1/4 power in range). Doubling antenna aperture increases range by 41% (2^0.5). Reducing noise figure from 6 dB to 3 dB improves range by 19%. RCS is target-dependent and often the limiting uncertainty — a 10 dB RCS reduction (stealth) cuts detection range by 44%.

How does target size affect radar detection?

RCS scales roughly with physical cross-section but depends heavily on shape and materials. A flat plate reflects 30+ dB more than a sphere of equal area at normal incidence. Stealth aircraft use faceting and RAM (radar-absorbing material) to reduce RCS from 10 m² to 0.001 m² — requiring 100× closer approach for detection.

What's the difference between monostatic and bistatic radar equations?

Monostatic (co-located TX/RX) uses R⁴ in denominator. Bistatic (separated TX/RX) uses R_tx²·R_rx², which can improve range when target is between stations. Bistatic RCS differs from monostatic — forward scatter RCS can exceed backscatter by 10–20 dB for conducting objects at certain geometries.

How do I account for rain attenuation?

Rain attenuation per ITU-R P.838: at 10 GHz, 10 mm/hr rain causes 0.1 dB/km one-way (0.2 dB/km two-way). At 77 GHz automotive radar, heavy rain (25 mm/hr) causes 10 dB/km — limiting effective range to ~100 m. Always add two-way path loss for weather effects.

References

Introduction to Radar Systems, 3rd ed. · Principles of Modern Radar: Basic Principles · Radar Handbook, 3rd ed.
  1. Introduction to Radar Systems, 3rd ed. — Merrill I. Skolnik (2001), Chapter 1 — The Nature of Radar
  2. Principles of Modern Radar: Basic Principles — Mark A. Richards, James A. Scheer, William A. Holm (2010)
  3. Radar Handbook, 3rd ed. — Merrill I. Skolnik, editor (2008)
  4. A closed-form approximation to Robertson's detection characteristics — Walter J. Albersheim, Proc. IEEE 69(7), 1981, p. 839

Shop Components

As an Amazon Associate we earn from qualifying purchases.

  • SMA ConnectorsStandard SMA RF connectors for board-to-cable connectionsAmazon →
  • RF Coaxial CablesCoaxial cable assemblies for RF signal routingAmazon →
  • TinySA Spectrum AnalyzerCompact handheld spectrum analyzer for RF measurement up to 960 MHzAmazon →