Parabolic Dish Antenna Calculator
Calculate parabolic dish gain, HPBW and effective aperture. Design satellite and microwave dish antennas. Free, instant results.
Aperture gain η(πD/λ)² · HPBW ≈ 70λ/DAPI slug parabolic-dish-antenna
Formula
| Symbol | Quantity | Your value |
|---|---|---|
| G | Antenna gain (dBi) | +41.0 dBi |
| η | Aperture efficiency | 55.0 % |
| D | Dish diameter (m) | 1.2 m |
| λ | Wavelength (0.3/f_GHz) (m) | — |
| HPBW | Half-power beamwidth (degrees) | 1.5° |
Assumptions
5 items
- 01Gain is G = 4π·η·A/λ² with A = π·D²/4, the projected aperture, and η the aperture efficiency entered, which lumps illumination taper, spillover, blockage and surface error; none is modelled separately.
- 02The half-power beamwidth is the rule of thumb 70λ/D degrees.
- 03No noise temperature or G/T is reported: sky noise, spillover onto the ground, feed loss and the LNB, which set a receive dish's noise, are not modelled.
- 04Far field and free space, with λ = c/f and c = 299 792 458 m/s; the focal ratio and the surface accuracy do not enter.
- 05Synthesis solves the diameter (0.01–500 m) or the efficiency (1–100 %) numerically for a target gain, or the diameter for a target beamwidth.
Worked example
Ku-band dish for 40 dBi at 12 GHz
A Ku-band receive dish at 12 GHz must give 40 dBi with a 60 % aperture efficiency. Solving the diameter for that gain gives 1.027 m.
| Step | Expression | Result |
|---|---|---|
| Wavelength | λ = 299 792 458 m/s / 12 GHz | 24.98 mm |
| Diameter for 40 dBi | D = (0.02498 / π) × √(10^(40/10) / 60 %) | 1.027 m |
| Effective area | 60 % × π × (1.02663 m / 2)² | 0.4967 m² |
| Gain check | 10·log10(4π × 0.4967 / 0.02498²) | +40.0 dBi |
| Half-power beamwidth | 70 × 0.02498 / 1.02663 | 1.7° |
How it works
Parabolic dish calculator computes gain, beamwidth, and aperture efficiency from diameter and frequency — satellite ground station engineers, radio astronomers, and microwave backhaul designers achieve the highest gains (30-60 dBi) through aperture antennas. Gain is G = eta * (pi*D/lambda)^2, where eta is aperture efficiency (typically 55-70%) and D is dish diameter, per Balanis's 'Antenna Theory' (4th ed.) and ITU-R S.465-6.
A 1-meter dish at 12 GHz (Ku-band satellite TV) achieves G = 0.6 * (pi*1/0.025)^2 = 37.7 dBi with 55% efficiency. Doubling diameter adds 6 dB gain; doubling frequency adds 6 dB gain for the same physical dish. The 3-dB beamwidth theta = 70*lambda/D narrows with increasing gain: a 3-meter dish at 12 GHz has 0.7-degree beamwidth, requiring precision pointing within 0.2 degrees.
Aperture efficiency is limited by: illumination taper (feed pattern doesn't uniformly illuminate aperture, typically 1-2 dB loss), spillover (feed radiation missing the reflector, 0.5-1 dB), surface accuracy (RMS error should be < lambda/16 for < 0.5 dB loss), blockage (feed and support structure shadow the aperture, 0.3-1 dB), and feed mismatch. Prime-focus feeds are simpler; Cassegrain and Gregorian configurations allow shorter focal length and easier feed access but add subreflector blockage.
This calculator does not report an antenna noise temperature. Antenna temperature depends on the elevation angle, on the sky's brightness temperature at that elevation and frequency (ITU-R P.372) and on how much of the feed pattern spills over onto warm ground, and none of these is an input here. Treating every aperture loss as spillover onto 290 K ground, 290 K × (1 − η), reads 101.5 K for a 1.2 m Ku-band dish at 65 % efficiency, whose datasheet gives 43–46 K at 20–30° elevation.
Practical tips
- For fixed satellite reception, use offset-fed dishes — no feed blockage improves efficiency 5-10% and eliminates rain/snow accumulation in feed
- Specify surface accuracy as RMS error < lambda/20 for < 0.3 dB gain degradation; solid dishes achieve 1-2 mm, mesh dishes 5-10 mm, limiting mesh to frequencies below approximately 10 GHz
- For transportable stations, consider shaped reflector dishes (edge-tapered illumination) that maintain efficiency while reducing sidelobe levels for interference mitigation per ITU-R S.465
Common mistakes
- Neglecting aperture efficiency — theoretical maximum gain assumes eta = 1; practical dishes achieve 55-70% efficiency; using G = (pi*D/lambda)^2 without eta factor overestimates gain by 1.5-2.5 dB
- Ignoring surface accuracy requirements — RMS surface error > lambda/16 causes significant gain loss; a 3-meter mesh dish suitable for C-band (lambda = 75 mm, needs 5 mm RMS) fails at Ku-band (lambda = 25 mm, needs 1.5 mm RMS)
- Underestimating pointing requirements — 1-degree pointing error on a 1-degree beamwidth antenna causes 3 dB gain loss; high-gain dishes require motorized tracking with 0.1-degree accuracy for satellite tracking
- Overlooking noise temperature contribution — antenna temperature from ground spillover and atmospheric absorption adds 20-100 K to system noise; G/T improvement requires both high gain AND low noise temperature
Frequently asked questions
5 questions
What determines the gain of a parabolic dish antenna?
Three factors per Balanis analysis: (1) Aperture area A = pi*(D/2)^2 — doubling diameter quadruples area and gain (+6 dB). (2) Wavelength lambda = c/f — halving wavelength (doubling frequency) quadruples electrical area and gain (+6 dB). (3) Aperture efficiency eta (55-70% typical) accounting for illumination taper, spillover, surface errors, and blockage. Combined: G = eta*(pi*D/lambda)^2. A 3 m dish at 12 GHz with 60% efficiency: G = 0.6*(pi*3/0.025)^2 = 85,000 = 49.3 dBi.
How does dish shape affect antenna performance?
Parabolic curvature is essential — all rays parallel to axis reflect to focal point with equal path length, creating in-phase addition. Deviations from perfect parabola cause phase errors: RMS surface error sigma causes gain loss of exp(-(4*pi*sigma/lambda)^2). At sigma = lambda/16: loss = 0.5 dB. At sigma = lambda/8: loss = 2 dB. Practical implications: (1) Solid dishes achieve 1-3 mm RMS (usable to 30 GHz). (2) Mesh dishes achieve 5-10 mm RMS (usable to 10 GHz). (3) Inflatable dishes achieve 10-20 mm RMS (limited to low microwave). Surface accuracy is often the limiting factor for high-frequency performance.
What is the typical frequency range for parabolic dish antennas?
Practical range: 1-100 GHz, with size-frequency tradeoffs: Below 1 GHz: Dishes become very large (10+ meters for useful gain); Yagis or arrays often preferred. 1-10 GHz (L/S/C-band): 2-10 m dishes for satellite earth stations, radio astronomy, radar. 10-30 GHz (Ku/Ka-band): 0.5-3 m dishes for satellite TV, VSAT, point-to-point links. 30-100 GHz (mm-wave): 0.2-1 m dishes for high-capacity backhaul, radio astronomy. Above 100 GHz: Surface accuracy requirements (< 0.1 mm RMS) make machined metal reflectors or holographic surfaces necessary.
What is aperture efficiency and what affects it?
Aperture efficiency eta = G_actual / G_ideal represents how effectively the physical aperture converts to gain. Components per Balanis: Illumination efficiency (80-90%): Feed doesn't uniformly illuminate aperture — edge taper reduces sidelobe but wastes outer aperture. Spillover efficiency (90-95%): Feed radiation missing reflector adds to noise. Surface efficiency (95-99%): Phase errors from surface inaccuracies. Blockage efficiency (95-99%): Feed and struts shadow aperture. Polarization efficiency (99%+): Cross-pol mismatch loss. Combined: eta = 0.85 * 0.92 * 0.97 * 0.97 * 0.99 = 0.73 typical. Offset-fed dishes eliminate blockage, achieving 75-80% efficiency.
How do I calculate required dish size for a satellite link?
Work backwards from link budget: (1) Determine required EIRP (transmit) or G/T (receive) from link margin analysis. (2) Assume system noise temperature T_sys (typically 50-150 K for cooled LNA). (3) Required gain G = G/T + 10*log10(T_sys) for receive; G = EIRP - P_transmitter for transmit. (4) Solve for diameter: D = (lambda/pi)*sqrt(G/(eta)). Example: G/T = 35 dB/K at 12 GHz, T_sys = 80 K. G = 35 + 19 = 54 dBi. D = (0.025/pi)*sqrt(250000/0.6) = 5.1 m. Standard dish sizes: 1.2, 1.8, 2.4, 3.0, 3.7, 4.5, 6.0, 7.3, 9.0 m — select next size up for margin.
References
Antenna Theory: Analysis and Design, 4th ed. · Antenna Theory and Design, 3rd ed.
- Antenna Theory: Analysis and Design, 4th ed. — Constantine A. Balanis (2016), Chapter 15 — Reflector antennas and parabolic dish gain
- Antenna Theory and Design, 3rd ed. — Warren L. Stutzman & Gary A. Thiele (2012), Chapter 9 — Parabolic reflector efficiency and directivity
Shop Components
As an Amazon Associate we earn from qualifying purchases.