Skip to content

Wavelength & Frequency Calculator

Convert between frequency, wavelength, and wavenumber in free space or any dielectric. Calculate half-wave and quarter-wave lengths for antenna design. Free, instant results.

λ = c/(f·√εr) · c = 299 792 458 m/sAPI slug wavelength-frequency

Sign in to saveSave

Linked values

Type in any field — the others follow.
ExampleDecimals
Relative permittivity εᵣ of the medium (1 = free space/air)

1 to 100

GHz

1 kHz to 1 THz

mm

300 µm to 300 km

mm

300 µm to 300 km

mm

150 µm to 150 km

mm

74.9 µm to 74.9 km

rad/m

2.1×10⁻⁵ to 21 000 rad/m

Common
FREQUENCY1 MHz10 MHz100 MHz1 GHz10 GHz100 GHz2.400 GHzWAVELENGTH IN MEDIUM100 m10 m1 m100 mm10 mm124.914 mmHALF-WAVE LENGTH100 m10 m1 m100 mm10 mm62.457 mmQUARTER-WAVE LENGTH10 m1 m100 mm10 mm1 mm31.228 mm

Reference values

Select a row to load it
FrequencyFree-Space WavelengthWavelength in MediumHalf-Wave LengthQuarter-Wave LengthWavenumber
MHz29.979m29.979m14.990m7.495m0.210rad/m
MHz9.993m9.993m4.997m2.498m0.629rad/m
MHz2.998m2.998m1.499m749.481mm2.096rad/m
MHz999.308mm999.308mm499.654mm249.827mm6.288rad/m
GHz299.792mm299.792mm149.896mm74.948mm20.958rad/m
GHz99.931mm99.931mm49.965mm24.983mm62.875rad/m
GHz29.979mm29.979mm14.990mm7.495mm209.585rad/m
GHz9.993mm9.993mm4.997mm2.498mm628.754rad/m

Formula

Balanis, "Antenna Theory" 3rd ed.
λ=cfεr\lambda = \frac{c}{f\sqrt{\varepsilon_r}}
SymbolQuantityYour value
λWavelength in medium (m)124.9 mm
cSpeed of light (299.792458 mm/ns) (m/s)—
fFrequency (Hz)2.4 GHz
εᵣRelative permittivity of medium1

Assumptions

5 items
  1. 01c = 299 792 458 m/s exactly, and the free-space wavelength is λ₀ = c/f.
  2. 02In the medium λ = λ₀/√εᵣ: the wave travels wholly in one uniform, lossless, non-magnetic dielectric; for microstrip, where part of the field is in air, enter the effective permittivity rather than the board's εᵣ.
  3. 03The half- and quarter-wave lengths are exactly λ/2 and λ/4 in the medium; no end effect, antenna shortening factor or connector length is applied.
  4. 04The wavenumber is k = 2π/λ in rad/m, in the medium; εᵣ is taken as constant with frequency, so dispersion is not modelled.
  5. 05A frequency of 0 or less, or an εᵣ below 1, is refused; the inputs run from 1 kHz to 1 THz and εᵣ from 1 to 100.

Worked example

GPS L1 quarter-wave stub in PTFE coax

A GPS front end needs a quarter-wave stub at 1 575.42 MHz, cut from coax with a solid PTFE dielectric (εᵣ 2.1). Starting from the frequency, find the stub's physical length.

StepExpressionResult
Free-space wavelength299 792 458 m/s / 1 575.42 MHz190.3 mm
Velocity factor1/√2.10.6901
Wavelength in PTFE190.3 mm / √2.1131.3 mm
Quarter-wave stub131.3 mm / 432.83 mm

How it works

This calculator converts wavelength to frequency for RF engineers, optical designers, and physicists working across the electromagnetic spectrum from radio waves to gamma rays. The fundamental relationship f = c / lambda uses c = 299,792,458 m/s exactly (SI Brochure 9th edition, 2019 - a defined constant with zero uncertainty). This spans 15 orders of magnitude: radio waves (lambda = 1 km, f = 300 kHz) to visible light (lambda = 500 nm, f = 600 THz) to X-rays (lambda = 0.1 nm, f = 3 × 10^18 Hz). In dielectric media, the effective wavelength shortens: lambda_eff = lambda_0 / sqrt(epsilon_r). FR-4 PCB (epsilon_r = 4.3) reduces wavelength to 48% of free-space, critical for microstrip filter and antenna design per IPC-2141.

Practical tips

  • Quick formula: f_GHz = 300/lambda_mm for free space (0.07% error). Reverse: lambda_mm = 300/f_GHz. At optical wavelengths: f_THz = 300/lambda_um
  • Per Rogers Corp application notes: measure substrate epsilon_r at your operating frequency - FR-4 varies from 4.7 at 100 MHz to 4.2 at 10 GHz due to dielectric dispersion
  • For precision RF: use vector network analyzer to measure actual electrical length rather than calculating from nominal epsilon_r; substrate thickness tolerance of +/-10% causes +/-5% wavelength error

Common mistakes

  • Using approximation c = 3 × 10^8 instead of exact 299,792,458 m/s - this 0.069% error causes 35 um positioning error per 50 mm at mmWave, exceeding typical PCB tolerances of +/-25 um
  • Neglecting dielectric constant in PCB calculations - assuming free-space wavelength on FR-4 makes a quarter-wave stub 2.05x too long, causing resonance at 2.83 GHz instead of 5.8 GHz
  • Mixing up effective permittivity with bulk permittivity - microstrip epsilon_eff depends on geometry; a 50-ohm trace on FR-4 has epsilon_eff = 3.3, not 4.3

Frequently asked questions

7 questions
How does wavelength change with frequency?

Wavelength is inversely proportional to frequency: lambda = c/f. Doubling frequency halves wavelength. Per SI: at 1 GHz lambda = 299.8 mm, at 2 GHz lambda = 149.9 mm, at 10 GHz lambda = 30.0 mm. This inverse relationship is why high frequencies enable smaller antennas but suffer higher path loss (Friis: loss proportional to f^2).

Why is sqrt(epsilon_r) used in the calculation?

Wave velocity in a medium is v = c/sqrt(epsilon_r × mu_r). For non-magnetic materials (mu_r = 1), velocity factor VF = 1/sqrt(epsilon_r). Since lambda = v/f, wavelength scales by VF. Per IPC-2141: FR-4 epsilon_r = 4.3 gives VF = 0.48, so a 2.4 GHz signal has lambda_eff = 60 mm instead of 125 mm free-space.

Can I use this calculator for all transmission media?

Yes, with the correct dielectric constant. Common values per IEEE/IPC: vacuum/air epsilon_r = 1.0, FR-4 = 4.3, Rogers RO4350B = 3.66, PTFE = 2.1, silicon = 11.7, GaAs = 12.9. For waveguides, use cutoff-adjusted wavelength: lambda_g = lambda_0/sqrt(1 - (f_c/f)^2).

What is the practical significance of wavelength calculation?

Wavelength governs all RF physical dimensions: antenna elements (dipole = lambda/2 per Balanis), transmission line stubs (quarter-wave = lambda/4), filter cavities (half-wave resonator), and PCB layout rules (IPC-2141: impedance control for traces > lambda/10). At 28 GHz 5G, lambda = 10.7 mm, so even 1 mm traces are electrically significant.

How accurate is the speed of light constant used?

The value 299,792,458 m/s is exact by SI definition (2019 redefinition). The meter is now defined as the distance light travels in 1/299,792,458 second, making c a defined constant with zero uncertainty. This provides 9-digit precision for all wavelength calculations, far exceeding typical manufacturing tolerances.

What is the wavelength of a 2.4 GHz WiFi signal?

lambda = c/f = 299,792,458 / 2.4e9 = 124.9 mm in free space. On FR-4 PCB (epsilon_r = 4.3): lambda_eff = 60.2 mm. Per IPC-2141: traces > 6 mm at 2.4 GHz need impedance control. Half-wave dipole = 62.4 mm per element; quarter-wave patch on FR-4 = 15.0 mm. WiFi channel spacing of 5 MHz corresponds to 0.26 mm wavelength difference.

How do I convert between frequency and wavelength in different media?

In free space: lambda_mm = 300/f_GHz (0.07% approx). In medium: lambda_eff = lambda_0/sqrt(epsilon_r). Velocity factor VF = 1/sqrt(epsilon_r): FR-4 VF = 0.48, Rogers RO4003C VF = 0.53, foam coax VF = 0.83, solid PE coax VF = 0.66 (per Belden specs). For microstrip, use effective permittivity which is geometry-dependent, typically 60-80% of bulk epsilon_r.

References

Microwave Engineering, 4th ed. · ITU Radio Regulations
  1. Microwave Engineering, 4th ed. — David M. Pozar (2011), Chapter 1.3 — Wavelength and wave velocity
  2. ITU Radio Regulations — International Telecommunication Union (2020), Article 2 — Frequency and wavelength definitions

Shop Components

As an Amazon Associate we earn from qualifying purchases.

  • SMA ConnectorsStandard SMA RF connectors for board-to-cable connectionsAmazon →
  • RF Coaxial CablesCoaxial cable assemblies for RF signal routingAmazon →
  • TinySA Spectrum AnalyzerCompact handheld spectrum analyzer for RF measurement up to 960 MHzAmazon →