Skip to content

Free-Space Path Loss Calculator

Calculate free-space path loss (FSPL) in dB using the Friis equation. Enter frequency and distance for wireless link budget analysis. Free, instant results.

Friis free-space loss · ITU-R P.525-4API slug free-space-path-loss

Sign in to saveSave

Inputs

Example
Signal frequency in MHz

100 kHz or more

Distance between transmitter and receiver in km

1 m or more

Results

Live

Free-Space Path Loss 100.1 dB

Free-Space Path LossFSPLCHECK
100.1dB

20.1 dB above the 80 dB limit

FSPL (linear ratio)FSPL
1.012×10¹⁰

Free-Space Path Loss against Distance

40608010012014016018010 m1 km100 kmdB

Drag the operating point or type a value.

Formula

FSPL(dB)=20⋅log⁡10(4πdf/c)\mathrm{FSPL}(dB) = 20·\operatorname{log}₁₀(4πdf/c)
SymbolQuantityYour value
FSPLFree-space path loss (dB)100.1 dB
dDistance between antennas (m)1 km
fSignal frequency (Hz)2.4 GHz
cSpeed of light (299792458) (m/s)—
λWavelength (c/f) (m)—
With your inputs
FSPL = 20·log₁₀(4π × 1 km × 2.4 GHz / c)100.05 dB

Assumptions

5 items
  1. 01Isotropic antennas: the loss is between two 0 dBi antennas, so antenna gains are added separately in a link budget.
  2. 02Free space: an unobstructed line of sight with no ground reflection, diffraction, multipath, atmospheric absorption or rain.
  3. 03Far field: the distance is much greater than the wavelength and the antenna size; below d = λ/4π the formula would show a gain, which is not physical.
  4. 04c = 299 792 458 m/s exactly, so the dB form is 32.45 + 20·log10(d in km) + 20·log10(f in MHz).
  5. 05The loss is spreading of the wavefront alone; no energy is absorbed along the path.

Worked example

5.8 GHz Wi-Fi backhaul, 10 km

An outdoor 802.11ac backhaul link at 5.8 GHz spans 10 km between two buildings; each end has a 30 dBm radio and a 23 dBi dish.

StepExpressionResult
Wavelength299 792 458 m/s / 5.8 GHz0.0517 m
Path loss20·log10(4π × 10 km × 5.8 GHz / 299 792 458 m/s)127.7 dB
Linear ratio(4π × 10 km × 5.8 GHz / 299 792 458 m/s)²5.911×10¹²
Received power with the dishes30 + 23 + 23 − 127.72−51.72 dBm

How it works

Free-Space Path Loss (FSPL) calculates the signal attenuation between two antennas with unobstructed line-of-sight — essential for satellite links, microwave backhaul, and point-to-point wireless design. RF engineers use FSPL to determine required transmit power and antenna gains before accounting for real-world losses.

The formula derives from the Friis transmission equation (IEEE Antennas and Propagation Society standard): FSPL(dB) = 20·log₁₀(d) + 20·log₁₀(f) + 20·log₁₀(4π/c), which simplifies to 32.45 + 20·log₁₀(d_km) + 20·log₁₀(f_MHz). At 2.4 GHz and 1 km, FSPL is 100.1 dB; doubling distance adds exactly 6.02 dB (inverse-square law). ITU-R P.525-4 provides the international reference for these calculations, used in spectrum coordination worldwide.

Path loss increases with frequency: at 5.8 GHz, FSPL is 7.7 dB higher than 2.4 GHz for the same distance. This explains why 5G mmWave (28 GHz) requires cell sites every 200–500 m while LTE (700 MHz) covers 10+ km. For distances under 100 m, atmospheric absorption is negligible (<0.01 dB); beyond 10 km, add 0.01–0.02 dB/km for oxygen/water vapor per ITU-R P.676.

Practical tips

  • Add 3–6 dB fade margin minimum for 99% link availability; 10–15 dB for 99.99% per ITU-R P.530 recommendations
  • Use exact c = 299,792,458 m/s (SI definition) for precision calculations; 3×10⁸ introduces 0.07% error
  • Above 10 GHz, add atmospheric absorption: 0.2 dB/km at 22 GHz (water vapor), 15 dB/km at 60 GHz (oxygen) per ITU-R P.676
  • For Earth-space links, add 0.5–2 dB ionospheric scintillation below 3 GHz (GPS L1 affected during solar maximum)

Common mistakes

  • Using FSPL for indoor/NLOS: real indoor path loss exponent is 2.5–4.0 (not 2.0), adding 10–30 dB over FSPL at 50 m
  • Confusing near-field vs far-field: FSPL only valid beyond d > 2D²/λ (Fraunhofer distance). For a 1 m dish at 10 GHz, far-field starts at 67 m
  • Ignoring cable losses: 30 m of RG-58 at 2.4 GHz loses 7.8 dB — equivalent to quadrupling the free-space distance
  • Applying FSPL to surface reflections: multipath adds constructive/destructive interference of ±6 dB or more; use two-ray ground reflection model below 1 GHz

Frequently asked questions

6 questions
What is free-space path loss?

Free-space path loss is the reduction in power density of an electromagnetic wave as it propagates through space, caused by the natural spreading of the wave's energy over an increasing area.

How does frequency affect path loss?

Higher frequencies experience greater path loss, meaning signal strength decreases more rapidly with distance compared to lower frequency signals.

Is free-space path loss the same in all environments?

No, free-space path loss assumes perfect vacuum conditions. Real-world environments introduce additional losses from obstacles, atmospheric conditions, and terrain.

How far will a 2.4 GHz WiFi signal travel?

Free-space path loss at 2.4 GHz is FSPL = 40 + 20·log10(d_meters) dB (approximately). At 100 m: ~80 dB FSPL. A typical WiFi transmitter at 20 dBm with 3 dBi antennas gives received power of 20+3+3−80 = −54 dBm — well above the −70 dBm sensitivity threshold. In practice, walls add 3–15 dB per barrier, so 100 m through a building is often marginal. Outdoor line-of-sight 802.11ac can reach 300+ m with directional antennas.

Why does path loss increase by 6 dB when I double the distance?

Free-space path loss follows an inverse-square law: power density decreases as 1/r². Doubling the distance quarters the received power, which is a 6 dB reduction (10·log10(4) = 6.02 dB). This is baked into the Friis equation: FSPL increases by 20·log10(2) = 6 dB per doubling of distance. At 10× the distance, FSPL increases by 20 dB.

Does free-space path loss apply inside buildings?

No — free-space path loss assumes no obstacles. Inside buildings, use the log-distance path loss model: PL(d) = FSPL(d₀) + 10·n·log10(d/d₀) + X_σ, where n is the path loss exponent (2 for free space, 3–4 for indoor environments, up to 6 in cluttered areas) and X_σ is a zero-mean Gaussian random variable representing shadowing. For link budget purposes, add 15–30 dB of building penetration loss depending on construction materials.

References

ITU-R P.525-4 · A Note on a Simple Transmission Formula · Microwave Engineering, 4th ed.
  1. ITU-R P.525-4 — Calculation of free-space attenuation
  2. A Note on a Simple Transmission Formula — Harald T. Friis, Proc. IRE 34(5), pp. 254–256 (1946)
  3. Microwave Engineering, 4th ed. — David M. Pozar (2011), Chapter 14.1

Shop Components

As an Amazon Associate we earn from qualifying purchases.

  • SMA ConnectorsStandard SMA RF connectors for board-to-cable connectionsAmazon →
  • RF Coaxial CablesCoaxial cable assemblies for RF signal routingAmazon →
  • TinySA Spectrum AnalyzerCompact handheld spectrum analyzer for RF measurement up to 960 MHzAmazon →